User Manual of Network Camera
91
2.
Select one alarm output channel in the
Alarm Output
drop-down list. You can
also set a name for the alarm output (optional).
3.
The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual
.
The delay time refers to the time duration that the alarm output remains
in effect after alarm occurs.
4.
Click
Edit
to enter the Edit Schedule Time
interface. The time schedule
configuration is the same as the settings of the arming schedule for motion
detection Refer to
Task 2
Set the Arming Schedule for Motion Detection
in
Section 6.6.1.
5.
You can copy the settings to other alarm outputs.
6.
Click
Save
to save the settings.
Figure 6-53
Alarm Output Settings
6.6.5
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
Summary of Contents for I0D2400
Page 1: ...User Manual of Network Camera 1 User Manual UD 6L0201D1919A01 Network Camera ...
Page 147: ...User Manual of Network Camera 143 Figure 9 3 Overlay Content Settings ...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters ...
Page 169: ...User Manual of Network Camera 165 ...