User Manual of Network Camera
85
3.
Set the Alarm Actions for Motion Detection.
Check the checkbox to select the linkage method. Notify surveillance center,
send email, upload to FTP, trigger channel and trigger alarm output are selectable.
You can specify the linkage method when an event occurs.
Figure 6-47
Linkage Method
Audible Warning
Trigger the audible warning locally. And it only supported by the device have
the audio output.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an
event occurs.
Send Email
Send an email with alarm information to a user or users when an event occurs.
Note:
To send the Email when an event occurs, you need to refer to
Section
6.3.10
Email Sending Triggered by Alarm
to set the related parameters.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
Notes:
Set the FTP address and the remote FTP server first. Refer to
Section 6.3.12
Configuring FTP Settings
for detailed information.
Go to
Advanced Configuration > Storage > Snapshot
page, enable the
event-triggered snapshot, and set the capture interval and capture number.
Summary of Contents for I0D2400
Page 1: ...User Manual of Network Camera 1 User Manual UD 6L0201D1919A01 Network Camera ...
Page 147: ...User Manual of Network Camera 143 Figure 9 3 Overlay Content Settings ...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters ...
Page 169: ...User Manual of Network Camera 165 ...