User Manual of Network Camera
39
Figure 5-4
Setting a Preset
2.
Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3.
Click
to finish the setting of the current preset.
4.
You can click
to delete the preset.
Note
:
Up to 16 presets can be configured for the Network Mini PT Camera.
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or when
an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
to call the
preset.
Or you can place the mouse on the presets interface, and call the preset by typing the
preset No. to call the corresponding presets.
Figure 5-5
Calling a Preset
Summary of Contents for I0D2400
Page 1: ...User Manual of Network Camera 1 User Manual UD 6L0201D1919A01 Network Camera ...
Page 147: ...User Manual of Network Camera 143 Figure 9 3 Overlay Content Settings ...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters ...
Page 169: ...User Manual of Network Camera 165 ...