User Manual of Network Camera
71
Figure 6-32
Display Info. on Stream
6.4.5
Configuring Target Cropping
Purpose:
You can specify a target area on the live video, and then it can be displayed via the
third stream in some certain resolution, thus providing more details of the target area
if needed.
Note:
Target cropping function varies according to different camera models.
Steps:
1.
Enter the Target Cropping settings interface:
Configuration> Advanced Configuration> Video/Audio> Target Cropping
.
2.
Check the checkbox of
Enable Target Cropping
to enable the function.
3.
Set Third Stream as the stream type.
4.
Select the cropping resolution for the video display of target area. A red rectangle
is displayed on the live video to mark the target area, and you can click-and-drag
the rectangle to locate the target area as desired.
5.
Click
Save
to save the settings. You can go to the Live View page and click the
Third Stream
tab to view the video of the target area.
Summary of Contents for I0D2400
Page 1: ...User Manual of Network Camera 1 User Manual UD 6L0201D1919A01 Network Camera ...
Page 147: ...User Manual of Network Camera 143 Figure 9 3 Overlay Content Settings ...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters ...
Page 169: ...User Manual of Network Camera 165 ...