Digital Video Recorder User Manual
62
Step 1
Go to Configuration > Event > Normal Event > Motion Detection.
Figure 6-13
Motion Detection
Step 2
Select Camera to configure.
Step 3
Check Enable.
Step 4
Set the motion detection area. Choose from:
Full screen: Click Full Screen to set the motion detection area as full screen.
Customized area: Drag on the preview window to draw motion detection areas.
Clear: Click Clear to clear the current motion detection areas.
Step 5
Adjust Sensitivity as your desire.
Sensitivity: It allows you to calibrate how readily movement triggers the alarm. A higher
value results in the more readily to triggers motion detection.
Step 6
Optionally, check False Alarm Filter. Then only when both the motion detection and PIR
events are triggered, the motion detection alarm will be triggered.
The option is only available for PIR camera.
Step 7
Set the arming schedule. Refer to 6.4.3 Configure Arming Schedule.
Step 8
Set the linkage actions. Refer to 6.4.4 Configure Alarm Linkage Action.
Step 9
Click Apply.