Fixed-angle Speed-measuring Radar
│
16
straight coming, rear triggering for moving vehicles straight going, no
data delivery without vehicles.
4.
Continuous triggering mode: deliver data when vehicles enter the
detection area, no data delivery without vehicles.
Triggerring distance: The horizontal distance of the radar to the pho-
tographing position.
Installation height: the actual installation height of the radar.
Sensitivity: the sensitivity of the target detection. The greater the val-
ue is, the lower sensitive the radar gets, 0.2~0.6 is recommended
Upper limit / lower limit: the highest and minimum speed values of
measurement required.
Speed accuracy correction: it is necessary to correct the speed detect-
ed by radar on some occasions.
The following steps can be proceeded when the parameter values are set.
Parameter setting: current parameters will be operating after clicking
this option, while lost when power off. Please choose "parameter
save" to save the current settings.
parameter save: save the current parameters and the radar will run
according them after restarted.
Restore factory settings: restore factory default parameters.
All options in "parameter setting zone" are valid in the active state. You
can get back to measure speed by choosing "speed measuring state" in
