Fixed-angle Speed-measuring Radar
│
12
Figure 11 device connection
If the Internet mode is selected.Then cilck the WiFi name of the ra-
dar
（
naming rules is "HIK+SN"
）
to complete the connection, as shown in
Figure 12.
Figure 12 WiFi connection diagram
If the Serial mode is selected.The software can automatically identi-
fy all available ports, and users can choose the corresponding ports ac-
cording to the radar (the specific port number can be seen in device man-
ager).
If no special customization, our radar baud rate is 9600bps, data bits
8 bits, stop bits 1 bits, no parity bits. After setting up, click "connect" to
connect the radar. The successful connection interface is shown as Figure
13.
