User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
48
Figure 6-35
Application Mode
2.
Select the
Trigger Type
.
Vehicle Detection
1)
Select the
Picture Mode
.
Scene Picture
and
Scene P Close-up
Picture
are selectable.
2)
(Optional) Check
Capture Plate Absence Vehicle
. Then the vehicle
without license plate will be captured.
3)
Select the
Capture Mode
. Only
Strobe Light Mode
is selectable.
4)
Select the
Scene Mode
.
Entrance and Exit
,
Toll Station
, and
Entrance
and Exit of Underground Parking Lot
are selectable.
5)
Enter the
Linked Lane No.
ranging from 1 to 99. The lane No. will be
overlaid on the captured picture.
I/O Coil
1)
Select the
Picture Mode
.
Scene Picture
and
Scene P Close-up
Picture
are selectable.
2)
Select the
Scene Mode
.
Entrance and Exit
,
Toll Station
, and
Entrance
and Exit of Underground Parking Lot
are selectable.
3)
Enter the
Linked Lane No.
ranging from 1 to 99. The lane No. will be
overlaid on the captured picture.
4)
Select the
I/O Trigger Default Status
.
Rising Edge
and
Falling Edge
are selectable.
5)
Select the
Linked I/O No.
When the coil detects that there is vehicle
passing, a rising or falling edge signal is sent to the linked I/O of the
capture unit to trigger capture.
The
I/O Trigger Default Status
and
Linked I/O No.
should be