User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
34
3.
Synchronize time.
Synchronizing Time by NTP Server
(1)
Check
NTP
to enable the
function.
(2)
Configure the following parameters:
Server Address
: IP address of NTP server.
NTP Port
: Port of NTP server.
Interval:
The time interval between the two synchronizing actions with NTP
server.
Figure 6-15
Time Sync. by NTP Server
If the capture unit is connected to a public network, you should use a NTP server that
has a time synchronization function, such as the server at the National Time Center
(IP Address: 210.72.145.44). If the capture unit is set in a customized network, NTP
software can be used to establish a NTP server for time synchronization.
Synchronizing Time Manually
Click
to set the system time from the pop-up calendar.
You can also check the
Synchronize with PC
to synchronize the time of the capture
unit with that of your computer.
Figure 6-16
Manual Time Sync.
4.
Click
DST
tab to enable the DST function and set the date of the DST period.
Figure 6-17
DST Settings