Figure 4-10 Network Switch Position
3. Lead out the 12 V power supply from the power switch and connect it to the switch power
interface.
4. Connect the network cable according to your actual needs.
4.5 Terminal Description
The lane controller contains main lane controller and sub lane controller, which controls the IR
beams, motor, and other components' work.
4.5.1 Main Control Board Terminal Description
The main lane control board contains power input, BUS interface, interconnecting interface,
supercapacitor interface, IR interface, barrier position control board interface and motor drive
interface.
The picture displayed below is the main control board diagram.
DS-K3B411SX Series Swing Barrier Quick Start Guide
21
