HIKVISION DS-96128NI-E16 User Manual Download Page 40

Page: 40 / 219

User Manual of Network Video Recorder

Name

Description

Previous Screen

Switch to the previous screen.

Next Screen

Switch to the next screen.

Start/Stop Auto-switch

Enable/disable the auto-switch of the screens.

Start Recording

Start continuous recording or motion detection recording of all channels.

Add IP Camera

Enter the IP Camera Management interface, and manage the cameras.

Playback

Enter the playback interface and start playing back the video of the selected

channel immediately.

Output Mode

Four modes of output supported, including Standard, Bright, Gentle and Vivid.

Aux Monitor

Switch to the auxiliary output mode and the operation for the main output is

disabled.



The

dwell time

of the live view configuration must be set before using

Start Auto-switch



If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when

right-clicking mouse on this camera.

Figure 3. 1

Right-click Menu

3.2.3

Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:

•

Single Screen:

Switch to a full screen display of the selected camera. Camera can be selected from a

dropdown list.

•

Multi-screen:

Switch between different display layout options. Layout options can be selected from a

dropdown list.

•

Next Screen:

When displaying less than the maximum number of cameras in Live View, clicking this feature

will switch to the next set of displays.

•

Playback:

Enter into Playback mode.

Summary of Contents for DS-96128NI-E16




























































































































































































































Search results

Summary of Contents for DS-96128NI-E16

Reviews:

Brands by name

Popular brands

HIKVISION DS-96128NI-E16, User Manual

Search results

Summary of Contents for DS-96128NI-E16

Reviews:

Brands by name

Popular brands