11
3.1 Basic configuration
Basic configuration includes three sub menus: system
、
date& time and DST.
3.1.1 System
Step1: enter into system configuration
Æ
basic configuration
Æ
system; refer to Fig 4-3:
Fig 4-3 basic configuration-basic
Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA resolution and language. The
definitions for every parameters display as below:
Device name:
the name of the device. It may display on the client end or CMS that help user to recognize the device remotely.
Video format:
two modes: PAL and NTSC. User can select the video format according to that of camera.
Password check:
enable this option, user needs to input user name and password can do corresponding operations with the relevant right in
system configuration.
Show time:
display time in live.
Show wizard:
tick off this item, there will display an opening wizard with time zone and time setup information
Max network uses:
set the max user amount of network connection
VGA resolution:
the resolution of live display interface, range from: VGA800*600
、
VGA1024*768
、
VGA1280*1024and CVBS
Note
：
When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor.
Language:
setup the menu language.
Note: after changed the language and video output, the device needs to login again.
3.1.2 Time & date
Step1: enter into system configuration
Æ
basic configuration
Æ
time & date; refer to Fig 4-4:
Fig 4-4 basic configuration-time & date
Step2: set the date format, time format, time zone in this interface; user also can adjust system date manually
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
