9
S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E
( c o n t i n u e d )
If you do not have the device’s
QR Code
: Enter the device information manually:
a.
Click the Edit (pencil) icon on top right corner.
b.
Enter device serial number (device must be online), then click the
OK
button.
c.
When the device appears on the “Results” screen, click the
Add
button.
d.
Enter device’s 6-character Verification Code (all upper case), then click the
OK
button.
e.
Click the Finish button.
10
A D D I P C A M E R A S
1.
Right click a window in
Live View
mode to display the menu.
2.
Click
Menu
to display Menu choices.
3.
Click
Cameras Setup
to display the Add Cameras window.
4.
Add camera(s) as follows:
Hikvision Camera Connected to Unit’s PoE Port
— Will automatically be added to an NVR
camera channel (D
x
) and will be visible on the camera list in white within two minutes.
Hikvision Camera Connected to the Network but Not Unit’s PoE Ports
— Will automatically be
detected and displayed at bottom of the camera list in yellow. Must be added to an NVR camera
channel manually:
1) Click an unused camera channel’s
D
x
checkbox.
2) Click the
EDIT
(Pencil) button to display the
Edit IP Camera
window.
3) Use pull-down menu to change
Adding Method
from “Plug and Play” to “Manual.”
4) Enter the camera’s IP address and other information as required.
5) Press the
OK
button to add the camera.
Hikvision Cameras Not Detected
— Must be added manually:
1) Click an unused camera channel’s
D
x
checkbox.
2) Click the
EDIT
(Pencil) button to display the
Edit IP Camera
window.
3) Use pull-down menu to change
Adding Method
from “Plug and Play” to “Manual.”
4) Enter the camera’s IP address and other information as required.
5) Press the
OK
button to add the camera.
NOTE:
If camera does not connect, use SADP program to find and modify camera
settings.
Third-Party
Cameras
— Must be added manually:
1) Click an unused camera channel’s
D
x
checkbox.
2) Click the
EDIT
(Pencil) button to display the
Edit IP Camera
window.
3) Use pull-down menu to change
Adding Method
from “Plug and Play” to “Manual.”
4) Enter the camera’s IP address and other information as required.
5) Press the
OK
button to add the camera.
