12
S E T U P R E C O R D I N G
The system defaults to continuously record video at 8 fps, or at 15 fps when motion is detected.
Recording Schedule
Default is to continuously record everyday. Do the following to change the recording schedule:
1.
Go to MENU > RECORDING CONFIGURATION > SCHEDULE.
2.
Choose
CONTINUOUS
or
EVENT/(MOTION DETECTION)
under the
Type
pull-down menu.
3.
Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect
(days will turn gray [off]) the calendar days you wish to record.
4.
Apply time settings as desired.
5.
Press
APPLY
.
Motion Detection Areas
To define the image areas that Motion Detection will monitor for each camera, do the following:
1.
Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.
2.
Use
Camera
pull-down menu to select camera to configure.
3.
Check the
Enable Motion Detection
checkbox to enable motion detection.
4.
Use
Sensitivity
boxes to select how responsive detection should be (the more green boxes lit,
the greater the sensitivity).
5.
Drag a grid(s) over the area(s) on the image that will be sensitive to motion.
6.
Click the
Settings Set
button to configure
Arming Schedule
(when detection is enabled) and
Linkage Actions
(what action(s) to take when motion is detected).
TYPE
Motion or Continuous (default)
COLOR
Shows Recording Schedule days:
•
Blue=Continuous
• Yellow=Event (motion/alarm)
• Grey=None
TIMES
Customize schedule times (ignore for
“motion only” recording)
ADD
Press to add time settings to
schedule
ENABLE SCHEDULE
If not checked, camera will not record
