User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
38
2)
Check the checkbox of certain cameras to be added.
3)
Click
Quick Add
to add the camera.
3.
To add other IP cameras:
1)
On the left side of the interface, you can enter the IP address, protocol, management port, user name,
password and other information of the IP camera to be added.
2)
Click
Add
to add the camera.
Note:
If you check the Synchronize IP Camera checkbox, the default settings of the NVR for the IP
camera is applied to the added camera.
2.2.2 Editing the connected IP cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the basic
setting of the IP cameras.
Steps:
1.
Click the
icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Figure 2. 11 Edit the Parameters
2.
Click
apply
to save the settings and click
OK
to exit the editing interface.
To edit more parameters:
1.
Click the
Advance Set
icon.
Figure 2. 12 Network Configuration of the Camera
2.
You can edit the network information and the password of the camera.