User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
201
Level:
Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator:
The
Operator
user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration.
•
Guest:
The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration.
•
User’s MAC Address:
The MAC address of the remote PC which logs onto the NVR. If it is configured
and enabled, it only allows the remote user with this MAC address to access the NVR.
4.
Click the
OK
button to save the settings and go back to the User Management interface. The added new user
will be displayed on the list, as shown in Figure 13. 7.
Figure 13. 7 Added User Listed in User Management Interface
5.
Select the user from the list and then click the
button to enter the Permission settings interface, as shown
in Figure 13. 8.
Figure 13. 8 User Permission Settings Interface
6.
Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of NVR.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Camera Management: The adding, deleting and editing of IP cameras.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
