HIKVISION DS-76-08-HI-ST User Manual Download Page 90

Page: 90 / 195

User Manual of Digital Video Recorder

7.1

Backing up Record Files

Before you start:

Please insert the backup device(s) into the device.

7.1.1

Quick Export

Purpose:

Export record files to backup device(s) quickly.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Choose the channel(s) you want to back up and click

Note:

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the

message box “Max. 24 hours are allowed for quick export.” will pop up.

Figure 7. 1

Quick Export Interface

Export.

Go to Export interface, choose backup device and click

to start exporting.

Note:

Here we use USB Flash Drive and please refer to

Chapter 7.1.2 Backing up by Normal Video

Search

for more backup devices supported by the device.

Lo-Call 1890 866 900 www.cctvireland.ie

[email protected]

Summary of Contents for DS-76-08-HI-ST




































































































































































































Search results

Summary of Contents for DS-76-08-HI-ST

Reviews:

Brands by name

Popular brands

HIKVISION DS-76-08-HI-ST, User Manual

Search results

Summary of Contents for DS-76-08-HI-ST

Reviews:

Brands by name

Popular brands