HIKVISION DS-76-08-HI-ST User Manual Download

Page: 101 / 195

User Manual of Digital Video Recorder

100

Note:

If the inserted USB device is not recognized:

•

Click

•

Reconnect device.

•

Check for compatibility from vendor.

Figure 7. 24

USB Flash Drive Management

Management of USB writers and DVD-R/W

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and click

to enter Search Result interface.

Note:

At least one channel shall be selected.

Figure 7. 25

Normal Video Search for Backup

Select record files you want to back up.

Click

to enter Export interface.

Note:

At least one record file shall be selected.

Lo-Call 1890 866 900 www.cctvireland.ie

[email protected]

Summary of Contents for DS-76-08-HI-ST




































































































































































































Search results

Summary of Contents for DS-76-08-HI-ST

Reviews:

Related manuals for DS-76-08-HI-ST

Brands by name

Popular brands

HIKVISION DS-76-08-HI-ST, User Manual

Search results

Summary of Contents for DS-76-08-HI-ST

Reviews:

Related manuals for DS-76-08-HI-ST

Brands by name

Popular brands