HIKVISION DS-7100HGHI-E1 User Manual Download

Page: 247 / 339

Digital Video Recorder User Manual

246

Chapter 16 DVR Management and Maintenance

16.1

Viewing System Information

Step 1

Enter the

System Information

interface.

Menu > Maintenance > System Info

Step 2

You can click the

Device Info

Camera

Record

Alarm

Network

and

HDD

tabs to view the

system information of the device.

Figure 16-1

System Information Interface

This alarm information is not available for the DS-7100 and DS-7200HGHI series.

You can view the hardware version in the

Device Information

interface.

16.2

Searching Log Files

Purpose

The operation, alarm, exception and information of the DVR can be stored in log files, which can
be viewed and exported at any time.

Step 1

Enter the

Log Search

interface.

Menu > Maintenance > Log Information

Summary of Contents for DS-7100HGHI-E1




















































































































































































































































































































































Search results

Summary of Contents for DS-7100HGHI-E1

Reviews:

Related manuals for DS-7100HGHI-E1

Brands by name

Popular brands

HIKVISION DS-7100HGHI-E1, User Manual

Search results

Summary of Contents for DS-7100HGHI-E1

Reviews:

Related manuals for DS-7100HGHI-E1

Brands by name

Popular brands