User Manual of DS-7000HI-S Series Net DVR
Page 70
5.14 Network Parameters
If you want to use network to access DVR, you must setup network parameters.
Note: If any of the network parameters is modified, you must save and reboot DVR to make
it become effective.
In main menu, move “Active Frame” to “Network” icon and press
[
ENTER
]
, you can enter
“Network” menu as follows:
“Network” menu description:
*NIC type:
Defautl is “10M/100M Auto”, the other options are: 10M Half-Dup, 10M
Full-Dup, 100M Half-Dup and 100M Full-Dup.
*IP address:
This IP address must not be conflict with other IP. If there is DHCP server in
network, you can set the IP as “0.0.0.0”, save and reboot DVR. In reboot process, DVR will
search the DHCP server and get one dynamic IP address. This item will display the dynamic IP
address. If DVR uses PPPoE function, also DVR can dialup into internet and this item will display
the dynamic internet IP address.
*Port:
Network access port number, must be greater than 2000.
*Advanced setup:
NTP is used for synchronizing time with time server, time server is
provided by NTP service provider: time.windows.com which is a famous time server provided by
Microsoft.
