HIKVISION DS-7004HI-S User Manual Download

Page: 26 / 121

User Manual of DS-7000HI-S Series Net DVR

Page 26

4.5 Manual Record

Note: The user must have the corresponding right, DVR has HDD and HDD is formatted

already.

Manual record

In preview mode, press

[

REC

]

key, in the pop-up login dialog, select the name and input the

correct password, you can enter the “Manual Record” interface.

In menu mode, press

[

REC

]

key to enter “Manual Record” interface directly.

Description

Manual record interface has follows parts: channel number, channel status, start/stop record,

start all and stop all buttons.

Channel:

List the channel number that DVR has.

Status:

Channel work status has 4 cases:

means idle. Green means the channel is

recording (including real time recording, alarm recording, motion detection recording). Red means

network tramsmission. Orange means both recording and network transmission.

Start/Stop:

“



” means you can start corresponding channl recording. “

” menas you can

stop recording.

Start All:

Press this button to start all channels recording.

Stop All:

Press this button to stop all channel recording.

Exit manual record

Press

[

ESC

]

key to enter preview mode. Press

[

]

key to enter main menu.

Press

[

PLAY

]

key to enter playback menu. Press

[

PTZ

]

key to enter PTZ control mode.

Summary of Contents for DS-7004HI-S


























































































































Search results

Summary of Contents for DS-7004HI-S

Reviews:

Related manuals for DS-7004HI-S

Brands by name

Popular brands

HIKVISION DS-7004HI-S, User Manual

Search results

Summary of Contents for DS-7004HI-S

Reviews:

Related manuals for DS-7004HI-S

Brands by name

Popular brands