User Manual of DS-6600 Audio/Video Encoder
47
(www.no-ip.com).
(3)
Enter the
User Name
and
Password
registered on the NO-IP website.
(4)
Click
Save
to save the settings.
Figure 7.14 NO-IP Settings
7.3.4 Configuring Email Settings
Purpose:
The system can be configured to send an Email notification to all designated receivers if an alarm event is
detected, e.g., motion detection event, video loss, tamper-proof, etc.
Before you start
1.
Before configuring the Email settings, the device must be connected to a local area network (LAN) that
maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet
depending on the location of the e-mail accounts to which you want to send notification.
2.
Please configure the DNS Server settings under
Remote Settings>Network Settings>Basic Settings
before
using the Email function.
Steps:
1.
Enter the Basic Network Settings (
Remote Configuration >
Network Settings > Basic Settings)
to set the
IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server.
2.
Click the
Remote Configuration >
Network Settings > Email Settings
to enter the Email Settings
interface:
