User Manual of DS-6300DI-T Decoder
21
Figure 4.13 Configure Channel On/Off
2.
Select a decode channel in the drop-down list in the
Decode Channel
field.
3.
Set the decoding channel to On or Off.
4.
Click
Save
to save the settings.
4.1.5 Configuring Picture Overlay
Purpose:
The Picture Overlay function can overlay a picture on the screen for the selected decode channel, and the position
of the picture overlaid on the screen can also be set here.
Steps:
1.
Click
Decode Operation
>
Decode Control
>
Picture Overlay
to enter the following interface:
Figure 4.14 Configure Picture Overlay
2.
Select the decode channel in the drop-down list in the
Decoding Channel
No. field.
3.
Click
Browse
to choose a picture from the local directory, and then upload it by clicking the
Upload
button.
4.
Set the X coordinate and the Y coordinate of the picture displayed on the screen to move the picture up
and down and left and right.
Note:
The picture must be in 24-bit BMP format and its width and height must be 32X pixel, with up to 128×128
resolution and 24 bits depth.
5.
You can check the checkbox of
Flash
to set the display style of the picture.
6.
Set the picture to show or hide.
7.
Click
Save
to save the settings.
Summary of Contents for DS-6300DI-T
