User Manual of DS-6300DI-T Decoder
20
Note:
Refer to
Chapter 4.1.2
for configuring the input stream assigned to the cycle decoding channel.
Figure 4.11 Edit Cycle Decoding of a Channel
5.
Click
OK
to save the settings and back to the Cycle Decode interface, or click
Back
to back to the Cycle
Decoding interface without saving.
6.
Repeat Step4 and Step5 to edit other input streams for cycle decoding.
You can also click
Delete
to remove the configured input stream from the list.
Note:
Up to 64 input streams can be configured for each cycle decoding channel.
Figure 4.12 Configure Input Streams for Decoding
7.
Click
Save
to save the configuration of input streams for the cycle decoding.
Example:
Configuration
: Decoding Channel: Channel 1, Cycle Time: 10 seconds, input streams configured for decoding:
10.
Result
: the video streams from these 10 input channels will be decoded by decoding channel 1 and displayed on
the screen in sequence with the duration of 10 seconds for each.
4.1.4 Enabling/Disabling the Decoding Channel
Purpose:
The Channel On/Off function enables you to start or stop the decoding and displaying for certain channels.
Steps:
1.
Click
Decode Operation
>
Decode Control
>
Channel On/Off
to enter the following interface:
Summary of Contents for DS-6300DI-T
