Figure 4-17 Add a Trap
Table 4-3 Parameters of a Trap
Parameter
Description
Target Host IP
The IP address of NMS. It cannot be the broadcast or
multicast address.
Community Name
The password used for authentication. Up to 32 bytes can
be set.
SNMP Version
The Agent supports SNMP Version 1 (SNMPv1) and SNMP
Version 2c (SNMPv2c).
Note
The prerequisite of successful connection between NMS
and Agent is that the SNMP version of NMS and Agent
must be the same.
3. Click OK.
4. Click Save to add a trap.
5. Optional: You can check the trap and click Delete to delete a trap.
4.6 STP Configuration
Spanning-Tree Protocol (STP) is a Layer 2 link management protocol that provides path redundancy
while preventing loops in the network. The STP uses a spanning-tree algorithm to select one switch
as the root of a spanning tree. STP determines the topology by transmitting Bridge Protocol Data
Unit (BPDU) packets between devices. Spanning-tree operation creates a stable network.
4.6.1 Global Configuration
Steps
1. Go to Switch Configuration → L2 Configuration → STP Configuration → Global Configuration .
2. Check Enable STP.
Gigabit PoE Switch Web User Manual
20
Summary of Contents for DS-3E1510P
Page 1: ...Gigabit PoE Switch Web User Manual...
Page 41: ...UD18556B...
