Note
All ports in the same aggregation group will be edited automatically at the same time.
-
Trunk Port
• A trunk port is a port that is assigned to carry traffic for all the VLANs.
• Select Port VLAN Type as TRUNK, select the PVID and enter the VLAN that are allowed
to be accessed.
Figure 4-12 Edit a Trunk Port VLAN
Note
• All ports in the same aggregation group will be edited automatically at the same time.
• You can check All VLANS are allowed to be accessed. to assign the port to all the VLANs.
4. Click OK.
5. Click Save to save the configuration.
4.4 QoS Configuration
Quality of Service (QoS) includes the transmission bandwidth, delay, packet loss rate and etc.
Increasing network bandwidth, decreasing network delay, and reducing packet losses can improve
QoS in network service. You can configure the scheduling mode and port priority of QoS.
Steps
1. Go to Switch Configuration → Basic Configuration → QoS → Scheduling Mode to select a
scheduling type.
Gigabit PoE Switch Web User Manual
16
Summary of Contents for DS-3E1510P
Page 1: ...Gigabit PoE Switch Web User Manual...
Page 41: ...UD18556B...
