HIKVISION DS-3E1510P, User Manual

Page: 19 / 41

Table 4-2 Parameters of Port Rate-Limiting
Parameter Description
Sending Rate-​Limiting • Rate-Limiting: The data sending rate of the
port is limited.
• No Rate-Limiting: The data sending rate of
the port is not limited.
Sending Rate-​Limiting Value Only editable when the sending rate of the
port is limited.
The range is from 1 to 1000 Mbps.
Receiving Rate-​Limiting • Rate-Limiting: The data receiving rate of the
port is limited.
• No Rate-Limiting: The data receiving rate of
the port is not limited.
Receiving Rate-​Limiting Value Only editable when the receiving rate of the
port is limited.
The range is from 1 to 1000 Mbps.
3. Click Save to complete the configuration.
4.1.4 Storm Control Configuration
Storm control prevents the ports from being disrupted by a broadcast, multicast, or unknown
unicast storm. Errors in the protocol-stack implementation, or mistakes in network configuration,
can cause a storm. The storm congests the network and degrades the network performance.
The packets passing from the port will be determined by the storm control if they are unknown
unicast, multicast, or broadcast. When the packets number exceeds the threshold, the incoming
data is dropped.
Steps
1. Go to Switch Configuration → Basic Configuration → Port Configuration → Storm Control .
Gigabit PoE Switch Web User Manual
10