manualshive.com logo in svg

HIKVISION DS-2XE6146F-HS, User Manual, Page: 63 / 176

Share
Download
HIKVISION DS-2XE6146F-HS User Manual Download Page 63

Network Camera User Manual 

51 

 

 

 

TCP/IP Settings 

2.

 

Configure the basic network settings, including the NIC Type, IPv4 or IPv6 

Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings 

and Multicast Address. 

3.

 

(Optional) Check the checkbox of

 Enable Multicast Discovery

, and then the 

online network camera can be automatically detected by client software via 

private multicast protocol in the LAN. 

4.

 

Configure the DNS server. Input the preferred DNS server, and alternate DNS 

server. 

5.

 

Click 

Save

 to save the above settings

. 

Notes:   

 

The valid value range of MTU is 1280 ~ 1500.   

 

The Multicast sends a stream to the multicast group address and allows multiple 

clients to acquire the stream at the same time by requesting a copy from the 

Summary of Contents for DS-2XE6146F-HS

















































































































































































Reviews:

No comments