HIKVISION DS-2XE6146F-HS, User Manual, Page: 161 / 176

Network Camera User Manual
149
Memory Card Detection
2.
View the memory card status on Status Detection tab.
Remaining Lifespan: It shows the percentage of the remaining lifespan. The
lifespan of a memory card may be influenced by factors such as its capacity and
the bitrate. You need to change the memory card if the remaining lifespan is not
enough.
Health Status: It shows the condition of your memory card. There are three status
descriptions, good, bad, and damaged. You will receive a notification if the health
status is anything other than good when the Arming Schedule and Linkage
Method are set.
Note: It is recommended that you change the memory card when the health status
is not “good”.
3.
Click R/W Lock tab to add a lock to the memory card.
With the R/W lock added, the memory card can only be read and write when it is
unlocked.
R/W Lock Setting

Add a Lock
(1)
Select the Lock Switch as ON.
(2)
Input the password.
(3)
Click Save to save the settings.

Unlock
(1)
If you use the memory card on the camera that locks it, unlocking will be
done automatically and no unlocking procedures are required on the part of
users.