HIKVISION DS-2XE6146F-HS User Manual Download Page 52

Page: 52 / 176

Network Camera User Manual

Notes:

•

VCA Resource function varies according to different camera models.

•

Face Detection and Heat Map are mutually exclusive. When SMART Event +

Heat Map is enabled, Face Detection interface will not be displayed.

•

The function may not be supported by some camera models.

Open Source Software License

Information about the open source software that applies to the IP camera can be

checked if required. Go to

Configuration > System Settings > About.

Maintenance

Upgrade & Maintenance

Purpose:

The upgrade & maintenance interface allows you to process the operations, including

reboot, partly restore, restore to default, export/import the configuration files, and

upgrade the device.

Enter the Maintenance interface:

Configuration

System

Maintenance

Upgrade & Maintenance



Reboot

: Restart the device.



Restore:

Reset all the parameters, except the IP parameters and user information,

to the default settings.



Default

: Restore all the parameters to the factory default.

Notes:

•

After restoring the default settings, the IP address is also restored to the

default IP address, please be careful for this action.

•

For camera that supports Wi-Fi, wireless dial, or wlan function,

Restore

action does not restore the related settings of mentioned functions to default.



Information Export

Summary of Contents for DS-2XE6146F-HS

















































































































































































Search results

Summary of Contents for DS-2XE6146F-HS

Reviews:

HIKVISION DS-2XE6146F-HS, User Manual, Page: 52 / 176

Search results

Summary of Contents for DS-2XE6146F-HS

Reviews: