HIKVISION DS-2XE6146F-HS User Manual Download Page 39

Page: 39 / 176

Network Camera User Manual

Recording and Capturing Pictures Manually

In the live view interface, click

on the toolbar to capture the live pictures or click

to record the live view. The saving paths of the captured pictures and clips can be

set on the

Configuration > Local

page. To configure remote scheduled recording,

please refer to

Section 6.1

Note:

The captured image will be saved as JPEG file or BMP file in your computer.

Operating PTZ Control

Purpose:

In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom

control of the camera.

Note:

To realize PTZ control, the camera connected to the network must support the

PTZ function or have a pan/tilt unit installed to the camera. Please properly set the

PTZ parameters on RS485 settings page referring to

Section 6.2.4 RS485 Settings.

PTZ Control Panel

On the live view page, click next to the right side of the live view window to show

the PTZ control panel and click to hide it.

Click the direction buttons to control the pan/tilt movements.

PTZ Control Panel

Summary of Contents for DS-2XE6146F-HS

















































































































































































Search results

Summary of Contents for DS-2XE6146F-HS

Reviews:

HIKVISION DS-2XE6146F-HS, User Manual, Page: 39 / 176

Search results

Summary of Contents for DS-2XE6146F-HS

Reviews: