User Manual of Thermal Network Positioning system
© Hikvision
50
5.2.5
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the positioning systems.
Steps:
1.
Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2.
Check the checkbox to set the actions taken for the Exception alarm. Refer to
Section
5.2.1 Configuring Motion Detection
Figure 5-19
Exception Settings
3.
Click
to save the settings.
5.3
Smart Event Configuration
The functions vary depending on the models of positioning system.