HIKVISION DS-2TD8166-180ZE2F-V2, User Manual, Page: 34 / 143

User Manual of Thermal Network Positioning system
© Hikvision
26
Figure 4-7 Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset you
want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
 The following presets are predefined with special commands. You can only call them
but not configure them. For instance, preset 99 is the “Start auto scan”. If you call the
preset 99, the positioning system starts auto scan function.
 Pattern function varies depending on the models of positioning system
.
Table 4-4 Special Presets
Preset Function Preset Function
33 Auto flip 92 Start to set limit stops
34 Back to initial position 93 Set limit stops manually
35 Call patrol 1 94 Remote reboot
36 Call patrol 2 95 Call OSD menu
37 Call patrol 3 96 Stop a scan
38 Call patrol 4 97 Start random scan
39 Day mode (IR cut filter in) 98 Start frame scan
40 Night mode (IR cut filter out) 99 Start auto scan
41 Call pattern 1 100 Start tilt scan
42 Call pattern 2 101 Start panorama scan
43 Call pattern 3 102 Call patrol 5
44 Call pattern 4 103 Call patrol 6
45 One-touch Patrol 104 Call patrol 7
90 Wiper 105 Call patrol 8