User Manual of Thermal Network Positioning system
© Hikvision
104
7.3.10
Configuring Linear Scan
Steps:
1.
Get to the linear scan interface:
Configuration > Advanced Configuration> PTZ > Linear Scan.
Figure 7-38
Linear Scan
2.
Select Camera 1 or Camera 2 from the Channel No. list.
3.
Zoom in and zoom out the camera to the appropriate zoom ratio.
4.
Click Save Ratio to save the zoom ratio.
5.
Optionally, you can click Enable Saved Ratio to set the camera to the saved zoom ratio.
6.
Click Set Scan Area and set the left/right/up/down limits with the PTZ control panel
and Iris+/- button.
7.
Optionally, you can click Clear to delete the saved scan area.
8.
Click Save to save the settings and the Linear Scan Area shows
Scan area saved
.
9.
Click Start Linear Scan and Stop Linear Scan to start and stop the saved linear scan.