User Manual of IR Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
24
(1)
Move the cursor to
SET BLANK
and click
IRIS+
button to enter the editing mode as shown in
the following figure. You can see a privacy mask on the live window.
ADJUST BLANK POS
FOCUS SHIFT STATUS
SAVE: OPEN
QUIT: CLOSE
Figure 3-10
Set the Privacy Mask
(2)
You can see
ADJUST BLANK POS
message on the screen. Click the direction buttons to adjust
the position of the privacy mask to the designed scene.
(3)
Click
FOCUS+
button, and you can see
ADJUST BLANK SIZE
message on the screen. Click the
up/down buttons to increase/decrease the height of the mask and click right/left buttons to
increase/decrease the width of the mask. Click
IRIS+
button to save the settings and return
to the previous menu and you can see the mask turn to gray.
(4)
To modify the configured mask, click
IRIS+
button to enter the
SET BLANK
menu and click
IRIS+
button again to modify.
Note:
The tilt range for configuring the privacy masks is from 0° to 70°.
4.
Enable or disable the privacy mask function.
Move the cursor to
BLANK STATUS.
Click
IRIS+
button to enter the editing mode and click the up
and down direction buttons to set it
ON
or
OFF
.
Note:
If no privacy mask has been configured, you cannot set the status as
ON
.
5.
Delete the privacy mask.
You can enter the
DELE BLANK
menu to delete the current privacy mask.
3.4
Configuring PTZ Control Parameters
Purpose:
You can configure panning, tilting and zooming movements, and configure PTZ control functions
including presets, patrols, patterns, etc. for the speed dome.
3.4.1
Configuring PTZ Parameters
Enter PTZ configuration menu:
MAIN MENU > DOME SETTINGS > MOTION PARAMETER
/R&DOO
ZZZFFWYLUHODQGLH
VKRS#FFWYLUHODQGLH