User Manual of IR Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
19
MAIN MENUS > DOME SETUP >CAMERA SETUP
CAMERA
FOCUS AF
ZOOM LIMIT 22
ZOOM SPEED HIGH
SLOW SHUTTER ON
IRCUT FILTER AUTO
D/N LEVEL 1
SHARPNESS 8
BACK EXIT
CAMERA
BLC/WDR OFF
BLC LEVEL N/A
AE MODE AUTO
IRIS 10
SHUTTER 50
GAIN N/A
EXPOSURE COMP 7
BACK EXIT
CAMERA
WHITE BALANCE AUTO
RED 210
BLUE 150
IMAGE FLIP OFF
FOCUS LIMIT 1M
INIT LENS OFF
NOISE REDUCE LOW
BACK EXIT
CAMERA
WIDE LIMIT 2.0
CHROMA SUPPRESS 1
SATURATION 1
CONTRAST OFF
HLC ON
HR MODE OFF
GAIN LIMIT 15
BACK EXIT
Figure 3-8
Camera Settings
Task 1:
Configure the focus settings.
Setting the focus mode
Steps:
(1)
Move the cursor to
FOCUS
using the direction buttons and click
IRIS+
to enter.
(2)
Click up/down direction buttons to set the focus mode to
AF
,
MF
or
HAF
.
AF
(Auto-focus): The lens remains in focus during PTZ movements.
MF
(Manual Focus): You need to adjust the focus with
Focus+
and
Focus-
buttons manually.
HAF
(Half-auto Focus): The speed dome focuses automatically only once after panning,
tilting and zooming.
(3)
Click
IRIS+
button to save the settings.
Setting the focus limit
Purpose:
This function is used to limit the minimum focus distance. You can configure the focus limit
longer when the target is at a distance, to avoid the speed dome focusing on the objects close to
it; or configure the focus limit shorter when the target is near the speed dome, and avoid it
focuses on the objects father.
You can set
FOCUS LIMT
to
1CM
,
30CM
,
1M
,
3M
and
AUTO
to make sure that the speed dome
focuses on the target.
Note:
The focus limit value varies according to the models of speed dome.
Task 2:
Configure the zoom settings.
Setting the zoom limit
/R&DOO
ZZZFFWYLUHODQGLH
VKRS#FFWYLUHODQGLH