HIKVISION DS-2CE12HFT-E Quick Start Manual Download Page 3

Digital Video Recorder Quick Start Guide

 

Regulatory Information 
FCC Information

 

Please  take  attention  that  changes  or  modification  not  expressly  approved  by  the  party  responsible  for 
compliance could void the user’s authority to operate the equipment. 

FCC  compliance: 

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  A  digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct the interference at 
his own expense.

 

FCC Conditions 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
1. This device may not cause harmful interference. 
2.  This  device  must  accept  any  interference  received,  including  interference  that  may  cause  undesired 
operation.

 

EU Conformity Statement 

This  product  and  -  if  applicable  -  the  supplied  accessories  too  are  marked  with  "CE"  and 
comply therefore with the applicable harmonized European standards listed under the EMC 
Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.   
2012/19/EU  (WEEE  directive):  Products  marked  with  this  symbol  cannot  be  disposed  of  as 
unsorted municipal waste in the European Union. For proper recycling, return this product to 
your  local  supplier  upon  the  purchase  of  equivalent  new  equipment,  or  dispose  of  it  at 
designated collection points. For more information see: 

www.recyclethis.info

 

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as 
unsorted municipal waste in the European Union. See the product documentation for specific 
battery information. The battery is marked with this symbol, which may include lettering to 
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to 
your  supplier  or  to  a  designated  collection  point.  For  more  information  see: 

www.recyclethis.info

 

Industry Canada ICES-003 Compliance 

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements. 

Summary of Contents for DS-2CE12HFT-E

















Reviews: