User Manual of HD-TVI Speed Dome
© Hikvision
29
3.4.2
Configuring Presets
Purpose:
A preset is a user-defined monitoring position/point. You can simply call the preset number to
change the monitor scene to the defined position.
Steps:
1.
Move the cursor to enter preset configuration submenu:
MAIN MENU > DOME SETTINGS > PRESETS
PRESETS
PRESET NO. 1
<UNDEFINED>
SET PRESET
CLEAR
BACK EXIT
Figure 3-12
Preset Configuration Menu
2.
Choose the preset number:
Move the cursor to
PRESET NO.
and click
IRIS+
to enter. Click the up and down buttons to
choose the preset number which needs to be edited.
If the preset has been defined, the preset
label will be listed under the number; if it has not been defined, you will see the information
UNDEFINED
under the number.
There are up to 255 presets can be set for the speed dome.
The system-defined presets will be displayed on this submenu and they are not editable.
3.
Set the preset position.
Move the cursor to
PRESET PTZ
and click
IRIS+
to edit the preset position. Use the direction
buttons to move the speed dome to find the desired scene/position, and then press
IRIS+
to
confirm the settings and return to the previous menu, or press
IRIS-
to cancel.
The preset position settings will be restricted by the limits if they are defined.
4.
Call the presets.
You can select the preset number from the drop-down preset list in the control panel of the
encoder through a web browser, and click the arrow to call a user-defined or system-defined
preset.
5.
Clear the preset settings.
Move the cursor to
CLEAR
and click
IRIS+
to clear the settings of the current preset.