User Manual of HD-TVI Speed Dome
© Hikvision
19
CAMERA
WB MODE AUTO
RED 210
BLUE 150
IMAGE FLIP OFF
FOCUS LIMIT 1M
2D DNR 1
3D DNR 2
BACK EXIT
CAMERA
MIN. ZOOM LIMIT 2.0
CHROMA SUPPRESS 1
SATURATION 1
CONTRAST OFF
SCENE MODE INDOOR
HLC ON
SHARPNESS COMP 15
BACK EXIT
CAMERA
GAIN LIMIT 15
DEFOG OFF
INIT LENS OFF
BACK EXIT
Figure 3-7
Camera Settings
Task 1:
Configure the focus settings.
Setting the focus mode
Steps:
(1)
Move the cursor to
FOCUS
using the direction buttons and click
IRIS+
to enter.
(2)
Click up/down direction buttons to set the focus mode to
AF
,
MF
or
HAF
.
AF
(Auto-focus): The lens remains in focus during PTZ movements.
MF
(Manual Focus): You need to adjust the focus with
Focus+
and
Focus-
buttons manually.
HAF
(Half-auto Focus): The speed dome focuses automatically only once after panning,
tilting and zooming.
(3)
Click
IRIS+
button to save the settings.
Setting the focus limit
Purpose:
This function is used to limit the minimum focus distance. You can configure the focus limit
longer when the target is at a distance, to avoid the speed dome focusing on the objects close to
it; or configure the focus limit shorter when the target is near the speed dome, and avoid it
focuses on the objects father.
You can set
FOCUS LIMT
to
1CM
,
30CM
,
1M
,
3M
,
5M
and
AUTO
to make sure that the speed
dome focuses on the target.
The focus limit value varies according to the models of speed dome.
Task 2:
Configure the zoom settings.
Setting the zoom limit
Purpose:
Zoom limit is a user-defined limitation of the zoom amount (Zoom amount=optical zoom× digital
zoom). If you set the zoom limit to the minimum value, the digital zoom will be invalid and the
optical zoom will reach the maximum value; if you set the zoom limit smaller, the digital zoom
will be enabled.
Steps:
(1)
Move the cursor to
ZOOM LIMIT
using the direction buttons and click
IRIS+
to enter.
(2)
Click up/down direction buttons to choose the limit from 23, 46, 92, 184, and 368.
(3)
Click
IRIS+
button to confirm.