HIKVISION DS-2AE7230TI-A User Manual Download Page 2 | Manualshive

Page: 2 / 47

HIKVISION DS-2AE7230TI-A User Manual Download Page 2

User Manual of HD-TVI Speed Dome

© Hikvision

1

Thank you for purchasing our product. If there is any question or request, please do not hesitate to
contact the dealer.
This manual is applicable to

HD-TVI Speed Domes.

This manual may contain several technically inaccurate points or printing errors, and the content is
subject to change without notice. The figures in this manual are for reference only. The updates will
be added into the new version of this manual. We will readily improve or update the products or
procedures described in the manual.

DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security
or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined
in  UL’s  Standard(s)  for  Safety,  UL60950-1.  UL  Certification  does  not  cover  the  performance  or
reliability  of  the  security  or  signaling  aspects  of  this  product.  UL  MAKES  NO  REPRESENTATIONS,
WARRANTIES  OR  CERTIFICATIONS  WHATSOEVER  REGARDING  THE  PERFORMANCE  OR  RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

«
1
2
3
4
...
»

Summary of Contents for DS-2AE7230TI-A
















































Reviews:

No comments