background image

Table 4-4 Button Description

Button

Description

Disable PTZ

Exit PTZ control mode.

Numeric Key

• In editing mode, tap it to enter number 1 to 16.

• In live view or PTZ mode, tap it to switch channel.

• During playback, tap it to switch channel.

ESC

Exit the current menu.

REC

Start/stop manual recording.

PLAY

• In live view mode, tap it to enter Instant Playback interface.

• During playback, tap it to select a day in the calendar.

ABC

In editing mode, tap it to switch input method among digits, letters, and

characters.

EDIT

• In editing mode, tap it to delete the content before the cursor.

• Check/uncheck a checkbox.

• In setting menu, tap it to enter editing mode.

MENU

• Enter main menu interface.

• In second-level menu, tap it to go back to Live View interface.

• During playback, tap it to hide the control bar.

F1

• During playback, tap it to switch between play and reverse play.

• In live view mode, tap it to start instant playback.

F2

• Tap it to switch tab page.

• During playback, tap it to switch playback mode between playback by

channel and playback by file.

• During simultaneous playback, tap it to switch channel.

MAIN/SPOT

Tap it to switch the output between main port and auxiliary port.

MULT

In live view mode, tap it to switch image division.

Directional Button

• Move the active selection in a menu. Tap it to move the selection up

and down.

• In live view mode, tap it to switch different channels.

• In playback mode:

• Up (corresponds to   in playback menu): Tap it to speed up.

• Down (corresponds to 

 in playback menu): Tap it to slow down.

DS-1100KI(B) Network Keyboard User Manual

27

Summary of Contents for DS-1100KI(B)










































































Reviews: