3. Press Num+PATROL to select which patrol to set.
Preset
It determines the order at which the PTZ will follow while moving through the patrol.
Speed
It defines the speed at which the PTZ will move from one preset to the next.
Duration
It refers to the time span to stay at the preset.
Figure 4-8 Edit Patrol
4. Press Num+ENTER to select preset.
5. Press Num+ENTER to set duration.
6. Press Num+ENTER to set speed.
Note
If you press Num+PATROL during steps 4 to 6, the settings will be cleared.
7. Repeat steps 4 to 6 to set more points of the patrol.
8. Press SET to finish setting.
Note
Press Num+PATROL again to clear all parameters set. Press SET to reset.
9. Press Num+PATROL to call the patrol.
Note
You can also tap in Local Live View interface to select Patrol, set and call patrol.
DS-1100KI(B) Network Keyboard User Manual
13
