HIKVISION DS-1100KI(B) User Manual Download

Page: 34 / 73

4. Select a day in calendar.

Playback Control

During playback, you can clip videos, capture images, control playback speed, etc.
Before the operation, you need to connect a USB flash drive or configure keyboard FTP settings.

Clipped videos and captured pictures will be saved to USB flash drive or FTP server. For steps of

storage configuration, see Storage .

Table 4-3 Button Description

Button

Description

Button

Description

Time bar

Drag time bar to

quickly locate on a

certain time to play.

Pause/resume

playback.

Stop playback.

Jump backward for 30

seconds.

During playback, press

it to start clipping.

Press it again to stop

clipping.

Jump forward for 30

seconds.

Outer shuttle

• Rotate it clockwise

to speed up.

• Rotate it

anticlockwise to

slow down.

Inner shuttle

Reserved

Capture

Press the button on

the top of joystick to

capture the images.

4.5.2 Video Wall Playback

Play videos on video wall.

Instant Playback

Play videos in 3/5/10/15 minutes.
Steps

1. Start video wall live view. For detailed steps, see Window Operation .

DS-1100KI(B) Network Keyboard User Manual

Summary of Contents for DS-1100KI(B)










































































Search results

Summary of Contents for DS-1100KI(B)

Reviews:

Related manuals for DS-1100KI(B)

Brands by name

Popular brands

HIKVISION DS-1100KI(B), User Manual

Search results

Summary of Contents for DS-1100KI(B)

Reviews:

Related manuals for DS-1100KI(B)

Brands by name

Popular brands