HIKVISION 114-029, User Manual, Page: 58 / 190

Network Camera User Manual
57
Modify an IP
(3)
Click the OK to finish modifying.

Delete an IP Address or IP Addresses.
Select the IP address(es) and click Delete .
5.
Click Save to save the settings.
Security Service
To enable the remote login, and improve the data communication security, the camera
provides the security service for better user experience.
Steps:
1.
Enter the security service configuration interface: Configuration > System >
Security > Security Service .
Security Service
2.
Check the checkbox of Enable Illegal Login Lock .
Illegal Login Lock: it is used to limit the user login attempts. Login attempt from
the IP address is rejected if admin user performs 7 failed user name/password
attempts (5 times for the operator/user).
Note: If the IP address is rejected, you can try to login the device after 30 minutes.
Advanced Security
Follow the steps below to set the advanced security parameters for the camera.