HIKVISION 114-029, User Manual, Page: 38 / 190

Network Camera User Manual
37
Icon Description
Manually capture the picture.
/ Manually start/stop recording.
/ Audio on and adjust volume /Mute.
/ Turn on/off microphone.
/
Start/stop digital zoom function.
/
Start/stop pixel counter
Note: The icons vary according to the different camera models.
Pixel Counter:
1.
Click Start Pixel Counter button to enable the function.
2.
Drag the mouse on the image to select the desired rectangle area. The width pixel
and height pixel is displayed on the bottom of the web.
3.
Click the button again to stop the function.
Note:
The pixel counter is only supported under the main stream and only one rectangle are
supported.
Recording and Capturing Pictures Manually
In the live view interface, click on the toolbar to capture the live pictures or click
to record the live view. The saving paths of the captured pictures and clips can be
set on the Configuration > Local page. To configure remote scheduled recording,
please refer to Section 6.1 .
Note: The captured image will be saved as JPEG file or BMP file in your computer.
Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom
control of the camera.
Note: To realize PTZ control, the camera connected to the network must support the