Page 11
7. Change the IP address to 192.0.0.100 and then enter in the password you used to activate
the room station and then click on OK.
8. Select the room station from the bottom section and click on ‘add to client’
9. Now you need to set some settings for this room station.
Leave the adding mode as IP/Domain.
Nickname
– Give the room station a name. In my example, it’s going to be called ‘Master
Room Station’.
Address
- leave it as 192.0.0.100
Port
– Leave this as port 8000
Username
– set this as admin
Password
– Use the password you used to activate this room station.
Once the above is set click on Add.
10. Once the device has been added, click on it from the top section and click on ‘Remote
Configuration’
