Page 1
Setting Up IP Intercom For The First Time
With WiFi Room Stations Only
Introduction
This tech guide will step you though the steps to set up the HikVision Villa IP Intercom for
the first time when using the Wi-Fi room stations (104-829).
This will allow each of the Sub room stations (Wi-Fi room stations (104-829)) to connect to
the system by Wi-Fi rather than using a LAN cable. The Master room station and the door
station still need to be connected by a LAN cable.
There are 2 sections in this tech guide.
Section 1.1
(On page 3) will guide you through the step on how to access the IP Intercom in
the iVMS software.
Section 1.2
(On page 4) will guide you through how to connect 1 door station to many room
stations.
