8
English
ROUTER SAFETY WARNINGS
1.
Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal
par ts of the power tool "live" and shock the
operator.
2.
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
3. Single-hand operation is unstable and dangerous.
Ensure that both handles are gripped
fi
rmly during
operation.
4. The bit is very hot immediately after operation.
Avoid bare hand contact with the bit for any
reason.
5) Service
a) Have your power tool serviced by a quali
fi
ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and in
fi
rm persons away.
When not in use, tools should be stored out
of reach of children and in
fi
rm persons.
SPECIFICATIONS
Model
M12V2
M12SA2
Voltage (by areas)*
(110 V, 120 V, 220 V, 230 V, 240 V)
Power Input*
2000 W
1700 W
Collet Chuck Capacity
12 mm or 1/2"
No-load speed
8000 – 22000 /min
22000 /min
Main Body Stroke
65 mm
Weight (without cord and
standard accessories)
6.3 kg
6.2 kg
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Straight Guide
...........................................................1
(2) Bar Holder .................................................................1
Guide
Bar
..................................................................2
Feed
Screw
...............................................................1
Wing
Bolt
...................................................................1
(3) Dust Guide.................................................................1
(4) Dust Guide Adapter ..................................................1
(5) Template Guide
.........................................................1
(6) Template Guide Adapter ...........................................1
(7) Centering Gauge
.......................................................1
(8) Knob
...........................................................................1
(9) Wrench
.......................................................................1
(10) 8mm or 1/4” Collet Chuck.........................................1
(11) Wing Bolt (A) ............................................................4
(12) Lock Spring ..............................................................2
Standard accessories are subject to change without
notice.
OPTIONAL ACCESORIES - sold separately
(1) Template Guide
Bottom of Sub base
A
B
C
16.5 mm
18 mm
4.5 mm
18.5 mm
20 mm
25.5 mm
27 mm
28.5 mm
30 mm
(2) Chuck Sleeve
d
D
20 mm
000Book̲M12V2̲Asia.indb 8
000Book̲M12V2̲Asia.indb 8
2019/01/21 15:24:30
2019/01/21 15:24:30
