background image

Handheld Thermography Camera User Manual 

5 G Wi-Fi (5.47 to 5.725 GHz) 

23 dBm 

5 G Wi-Fi (5.725 to 5.85 GHz) 

14 dBm 

 

 

Directive 2012/19/EU (WEEE Directive): Products marked with 
this symbol cannot be disposed of as unsorted municipal 
waste in the European Union. For proper recycling, return this 
product to your local supplier upon the purchase of equivalent 
new equipment, or dispose of it at designated collection 
points. For more information see: www.recyclethis.info 

 

Directive 2006/66/EC and its amendment 2013/56/EU 
(Battery Directive): This product contains a battery that 
cannot be disposed of as unsorted municipal waste in the 
European Union. See the product documentation for specific 
battery information. The battery is marked with this symbol, 
which may include lettering to indicate cadmium (Cd), lead 
(Pb), or mercury (Hg). For proper recycling, return the battery 
to your supplier or to a designated collection point. For more 
information see:www.recyclethis.info 

  

Industry Canada ICES-003 Compliance 

This device complies with Industry Canada licence-exempt RSS 
standard(s). Operation is subject to the following two conditions:   
(1) this device may not cause interference, and 
(2) this device must accept any interference, including interference that 
may cause undesired operation of the device. 
Le présent appareil est conforme aux CNR d'Industrie Canada applicables 
aux appareils radioexempts de licence. L'exploitation est autorisée aux 
deux conditions suivantes : 
(1) l'appareil ne doit pas produire de brouillage, et 
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique 
subi, même si le brouillage est susceptible d'en compromettre le 
fonctionnement. 

Summary of Contents for Pocket Series


















































Reviews: