HighPoint RocketStor RS6124V User Manual Download Page 10

Page: 10 / 53

LCD Screen

•

There are four main options within the LCD menu

•

Temperature

•

Fan Speed

•

Beeper

•

Backlight

To navigate through the menu please click on the right arrow button.

By pressing the right arrow key it will take you into the option you have
chosen

By clicking the right arrow button from the first LCD screen, this will lead you to
the 4 main options.

To get to the next page please move the * sign down by pressing the down
arrow button.

Once in a menu to change the option move the * to the option you would like

and press the back button (1

button on the right)

Temperature

•

You may choose to display Celsius or Fahrenheit

Fan Speed

•

There are total 6 options to choose from

•

SmartFan

–

Allow the computer to decided what speed the fan should run

according the temperature

•

Manual mode allows the user to choose what fan level to choose from and set it
to that level.

•

There are Level 0-4

Beeper

•

You may choose to disable the beeper

Backlight

•

You may choose to disable the backlight of the LCD screen

Summary of Contents for RocketStor RS6124V






















































Search results

Summary of Contents for RocketStor RS6124V

Reviews:

Related manuals for RocketStor RS6124V

Brands by name

Popular brands

HighPoint RocketStor RS6124V, User Manual

Search results

Summary of Contents for RocketStor RS6124V

Reviews:

Related manuals for RocketStor RS6124V

Brands by name

Popular brands